PEM L104 Control Panel w/ Transformer 240V

PEM L104-100 CONTROL when connected to a suitable PEM L104 Series Sensor will provide a dual stage waterlevel control system. This control will operate a solenoid fill valve to maintain a constant operational waterlevel in a fountain pond and in addition it has a low level safety shut off for the electrical equipment in a fountain pond, should the waterlevel drop below normal operating depth. PEM L104-100 has a 24V-50VA safety power supply included for the direct operation of a 24V solenoid fill valve in the water make up circuit. Indicating lights provide immediate status display. Green light is for Power ON, Yellow light indicates water make up circuit is engaged. Red light indicates that the low level safety shut off circuit is engaged and will not disengage until normal operating waterlevel is re-established. This control has a safety transformer for the sensor float switches, providing 12 VDC . Time delayed ON action of the water make up as of the safety shut off prevents rapid cycling due to wave action in a fountain pond. The wall mounted control panel is within a NEMA Type 4 corrosion resistant polycarbonate enclosure. Wiring to sensor assembly requires 4 unshielded #18 AWG size conductors. The installation must conform to all applicable electrical codes.

5.910 X 6.89 X 9.84

240 VOLTS