Piggy Back Floating Pump Switch LG599211

Piggyback Wide Angle Float Switch 120V for 3/4 HP Pumps

The float switch is a direct-acting, in-line control system for automatically controlling smaller lift pumps and sump pumps in water and sewage systems. The float switch consists of one float, one large mounting strap, and two small adjustable mounting clamps.

This pump switch is not designed to be directly wired to relays or motor contactors (the relay or motor contactor may experience chattering). A double float pump switch will operate more efficiently in these installations.

• Heavy duty contacts
• Totally self-contained pump switch — no control panel required
• Suitable for use in water and sewage applications
• Epoxy sealed switch and cord conductors
• Small enough to operate when space is limited
• Adjustable pumping range
• Not sensitive to rotation (no "up" side) or turbulence
• Piggyback plug (where applicable) allows manual operation
• Non-corrosive PVC plastic float
• Flexible 16 gauge (12 gauge on RFSN-20),2 conductor, UL/CSA SJOW neoprene, water-resistant cord